how to remove shower drain cover that has no screws

Lift-and-Turn Lift the open position ns and look for a set screw if there is no screw then you turn anticlockwise to remove it but if you find a small screw turn it using an Allen wrench or flathead until its loose enough to remove. The easiest ones to remove are the pop-up and flip-it drain covers.

Bathtub How To Remove Shower Drain Home Improvement Stack Exchange

They usually have little tabs that fit tight into small round openings its probably crusted on but it will come up.

. Take out the cover and thats it. Some previous owner attempted to fix it by filling the screw holes with clear silicone caulk. Check out their size and find an appropriate screwdriver.

Using the palm of your hand apply pressure on the uppermost end of the screwdrivers handle. But if theres a screw slacken it just slight enough to remove the stopper. You should be good to go.

Spray some spray lubricant along the lip of the drain cover. Use an electric drill with a steel drill bit to drill through the center of the screw. They have small tabs that you can pull on for easy removal.

Youre close but no cigar. All you need to do is grab the body and rotate it as you pull it out. Unscrew the screws and the cover will detach.

Locate a screw in the centre of the cover. Remove the mounting post using pliers. Just go over the shower drain look closely and youll notice the screws.

Unscrew the knob on the top of the drain stopper to see if there is a set-screw underneath. This is the easiest shower drain cover to remove you dont require any tool. If no screw simply turn counterclockwise to remove.

Fill the screw hole too and be very generous with the weld epoxy. If you dont have a screwdriver that fits consider getting a complete set like this one on Amazon affiliate link. Use needle-nose pliers to open the drain cover with no screw 3.

Was afraid that I was going to permanently bend it but a little wiggling with some pliers got it off. Example this oatey cover has tabs that grip inside the drain hole. Determine What Kind of Shower Drain Cover You Have.

How to remove a shower drain cover cap that doesnt have screws. The difficulty of removing the shower drain cover will largely depend on what kind you have installed. Insert the ends of a pair of needle-nose pliers into any of the openings on the drain cover.

If your Shower drain is clogged you will need to remove the cover to clean out the hairI. Unscrew the screw using the Phillips head screwdriver. You can try inserting a hacksaw blade into the drain opening then press it up against the screws that are on the back of the drain cap.

If you have a newer shower you may have one of those easy-to-remove covers. Additional Options for Removing Screws. With firmness hold the pliers securely with both hands - one hand per grip and then twist to the left.

When it drys fully cured drill a small hole for the screw into the flange. We have an old cast iron tub on the 2nd floor that has an overflow drain. There are also no screw holes in the drain pipe elbow as you commonly find with overflow drains.

If your drain stopper has a set-screw use a small screwdriver or a hex key to unscrew it. Hold a pliers firmly with one hand per grip and twist to the left. Not all shower drains will have this screw.

The bit will break apart the screw and the cover will be able to be removed. Get a screw can so you dont drop the screws down the drain. Take some of the JB Weld or epoxy and glue the parts back together bracing or clamping the broken part.

Alternatively try to chisel and chip out some wood that is around the screw head. In looking at it it seems the shower drain holes have been stripped I assume. How to Remove a Shower Drain Cover Plate That Doesnt Have Screws.

Spray some spray lubricant along. The adhesive will loosen eventually as long as you continue to apply steady force. --CLICK LINKS BELOW FOR PRODUCTS INRELATED TO VIDEO-- I recommend this new drain httpsamznto3bl99j0 Or this one httpsamznto3s44fNh Soak it.

If the cover doesnt get loose more lubricants might be needed. Place the tip of the screwdriver along the edge of the drain cover not outside the actual drain fixture. Check out their size and find an appropriate screwdriver.

The drill bit should be the approximate size of the diameter of the screw. Because of a leak in the 1st floor ceiling below it coming from the overflow drain I took off the cover plate and there is no gasket. Twist the entire stopper counterclockwise until it pulls free from its mounting post.

Clean the surface and inside cracks as best you can. If theres no screw holding the stopper simply turn the cover counter-clockwise and remove it. Removing the drain and replacing is.

Saw slowly and carefully to avoid scratching the tub. This is the original metal drain set in the original small blue tile. How to Remove a Trip-Lever Drain Stopper.

Perhaps to try and adhere the cover without using screws. Use the flat-head screwdriver to pop the drain cover out of the drain fixture. PushPull You shouldnt confuse the pushpull shower drain cover with its lift-and-turn counterpart.

Pull straight up and twist it a little if possible might want to use pliers that fit in the openings.

How To Remove A Shower Drain Cover Benjamin Franklin Plumbing Duncanville

Plumbing How Do I Remove Bathtub Drain Screw Home Improvement Stack Exchange